Ortur Model 180 32-bit Motherboard Laser Engraving Machine


Ortur Model 180  32-bit Motherboard Laser Engraving Machine Good Safety Performance, LaserGRBL (LightBurn) Control Software for Fast Installation180 X 180mm Large Engraving Area Fast Speed High Precision Laser Engraver

Fast and Precise Engraving

Ortur Laser Master is a portable laser engraving machine, which is easy to install and safe to operate. It has a built-in sensor accelerometer. When the machine tilts, it will automatically stop laser work and protect against laser damage. Support for GRBL open source software for operating fun. It supports dynamic control laser module, and PWM power regulation, low brightness regulation, laser temperature induction protection. It also supports lasers of different powers, so that this is a great device for DIY project.

Main Features
- 32-bit Motherboard with STM32 chip, more powerful, faster, higher precision. Easy to adjust the speed (0-3,000mm/min) and power (S0-S1,000) for both of engraving and cutting.
- Active position protection, there is a G-sensor on the motherboard for active position protection. If the machine detects unauthorized movement, the laser beam will stop.
- Laser beam safety guard, if your computer system halted, led to that the laser engraver stop moving, the laser beam will stop.
- Exposure limitation, after the laser beam is turned on, but there is no movement for a long time, it will automatically stop. Weak Light Mode: the laser beam automatically stops after 100 seconds. None Weak Light Mode: based on the power level, the laser beam automatically stops within 10 to 60 seconds.
- LaserGRBL is the most popular carving software in the world, could import different format images, you could editing in PhotoShop, Inkscape, CAD, etc. and then connect to the laser engraver via LaserGRBL for engraving and cutting.
- This laser engraver supports PWM mode.
- Pre-assembled parts, just need 5-10 minutes to install the machine.
- 180 x 180 mm engraving area.
- Aluminum profile + acrylic materials machine body.

Image format: NC, DXF, BMP, JPG, PNG
Operating system: Win XP, Win 7, Win 8, Win 10
Image size: 2000 x 2000 pixels / 0.075mm dot pitch
Power adapter output voltage: 12V
LU2-1 3W laser module (electric power: 3W, optical power: 400-500mw) external drive board.
The focus is small, the energy consumption is small, suitable for carved wood chipboard, white paper, and the grayscale image has the best effect.
LU2-2 7W laser module (electric power: 7W, optical power: 1.2-1.6w) external drive board.
The focus is slightly larger than LU2-1, but the power energy is greater than LU2-1, so the carving depth on the board paper is better than LU2-1, which can react on the black metal oxide layer.
LU2-3 15W laser module (electric power: 15W, optical power: 3.5-4W)
It can engrave various kinds of wood board paper and metal oxide layer. It is good at cutting plywood, black acrylic, and the grayscale effect is also good. It adds smoke exhaust function, improves the heat conduction efficiency of the light source, and improves the stability of the product.
LU2-4 20W laser module (electric power: 20W, optical power: 4.5-5W)
It can directly engrave stainless steel, with good engraving effect and precise focus, to solve the problem of difficult focus adjustment for customers, at the same time increase the smoke exhaust function, improve the heat conduction efficiency of the light source, and improve the stability of the product.

LightBurn ( paid software, lightburnsoftware.com ) supports Windows, Mac OS, and Linux. It's the most popular paid carving software in the world, very easy to use.

1.Please wear protective glasses when operating the machine.
2.Please do not touch the laser emitter with your hand, or it may burn your hand.
3.Please avoid strong impact on the machine.
4.Children under 14 are not allowed to use this product and children over 14 need adult supervision.
5.The light engraving machine cannot be directly applied to any mirror reflecting object, which may cause injury to the operator or burn the laser.
6.This product is not recommended for industrial cutting due to its high engraving speed.

1, Wholesale: Our MOQ for wholesale business is 50pcs, please contact service@uhommi.com if you are interested in buying in bulk.

2, Warranty: One Year Against Manufacturing Defect.

You may also like

Recently viewed